Before Operation; Using The Stop Button; Setting The Clock - AEG Electrolux MC1751E Gebrauchsanweisung

1. AG-21+22D-EU English

Before operation

Plug in the oven.
1. The oven display will flash:
2. Touch the STOP button the display will show:
To set the clock, see below.

Setting the clock

There are two setting modes: 12 hour clock and 24 hour clock.
1. To set the 12 hour clock, hold the MICROWAVE POWER LEVEL button down for 3
seconds.
2. To set the 24 hour clock, press the MICROWAVE POWER LEVEL button once more
after Step 1, in the example below
To set the clock, follow the example below.
Example: To set the 24 hour clock to 23:35.
1. Choose the clock
function. (12 hour
clock)
4. Set the minutes. Rotate the
TIMER/WEIGHT knob until the
correct minute is displayed (35).
NOTE:
1. You can rotate the TIMER/WEIGHT knob clockwise
or counter-clockwise.
2. Press the STOP button if you make a mistake during
programming.
3. If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
6
Downloaded From Microwave-Manual.com Manuals
22/11/2005
x1
will appear in the display.
Choose the 24 hour
clock.
x1and hold for 3
secs.
5. Press the MICROWAVE POWER
LEVEL button to start the clock.
15:34 Page 6

Using the Stop button

Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
will appear in the display.
2. Set the hours.
Rotate the TIMER/WEIGHT
knob until the correct hour is
displayed (23).
x1
x1
show
occurs during cooking, the programme will be
erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
x1 and hold for
3 secs.
3. Press the MICROWAVE
POWER LEVEL button
to change from hours
to minutes.
x1
Check the display.
after the power is reinstated. If this