Disassembly; Removing The Panels And The Frame - Wellsystem MEDWAVE Montageanweisung

5

Disassembly

20/90 1020049-00E
This section describes the steps for disassembly in detail.
DANGER!
Electricity throughout the entire device!
Assembly and connection to the mains electrical supply
must comply with the national regulations.
wellsystem MEDWAVE/MEDWAVE TOUCH:
Disconnect the sunbed from the power supply when
performing maintenance work requiring opening of the
device. See page 14
wellsystem WAVE/ WAVE TOUCH:
Before beginning work, pull out the mains plug or
disconnect all live lines.
Assembly, installation, upgrading or servicing the
equipment is only to be carried out by personnel
specially trained by JK-Global Service.
5.1

Removing the panels and the frame

Disassembly
12/2021