Velleman K6712 Gebrauchsanweisung Seite 18

IR REMOTELY CONTROLLED DIMMER
Together with the 15 channel transmitter (K6710) this receiver
allows you to remotely dim lights.
With a single channel transmitter you can remotely control up to 15
dimmers (15 x K6712).
The dimmer has two memories to preserve distinct dim presettings
and in addition you can make a given dimmer insensitive to a
certain memory, which can be handy when you use several
dimmers in the same room.
To complete the whole, the dimmer is equipped with an adapted
front plate, allowing easy building-in. The dimmer can also be
operated locally by means of a push button.
If required you can also set the receiver so as to make it only
adopt the on or off state, in order to make it suitable for switching
inductive loads such as halogen (with transformer) or neon lamps.
TECHNICAL DATA
Suppressed triac output: 2A or 440W at 220V
Can be set for:
- Switch over output (on/off)
- Pulse output (on as long as you press)
- Dimmer output (to be used only with bulbs)
Four identification codes
Fifteen channel codes
Two memories for preserving two dim states or on/off
Push button for local operation
Power supply 220 VAC or 110 VAC (*)
* If the supply voltage is 110V, you must fit a 1uF (min 200V)
capacitor for C13.
Modifications reserved
H6712-ED1-18