Parkside PLGS 2012 A1 Originalbetriebsanleitung Seite 35

overtemperature limit. To do
this, select the "Overheated"
field.
- when the battery is fully char-
ged. To do this, select the
"100% charged" field.
- 10 minutes before charging is
completed. To do this, select
the "10 min. until fully char-
ged" field.
• °F/°C switch
Here you can select between the
temperature display in degrees
Celsius and degrees Fahrenheit
• Device information
Here you will find the name of
the charger.
• - Settings
You will find the
right after you have selected the
charger.
- Press the
you can assign a new image
to the charger under "Symbol",
you can rename the charger
under "Name" or assign a
"Location" to the charger.
- „Device info" lets you view
the virtual ID, among other
options.
at the top
icon again and
- With "Tap to run and auto-
mate" you can select and
deselect smart scenarios and
automations. These have to
have been created first. See
the section "Creating a scena-
rio".
- If you go to "Offline notificati-
on" you can be choose to be
notified when a device is off-
line for more than 30 minutes.
- Under "Enable device", you
can authorize another user
from the same household to
control the charger using the
Lidl Home app.
- You can find the frequently
asked questions under "FAQ".
- Under "Check for firmware
upgrade" you can check
whether the firmware needs to
be upgraded and also per-
form the upgrade.
- The charger can be removed
from the app under "Remove
device". See also chapter
"Disconnecting the device and
deleting data from the app".
GB MT
35