Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FAULT
The machine or the light H01
does not come on
It does not load water or light
H02 does not come on
H03 light on
Tank filling does not stop when
the level is reached
Insufficient washing
Insufficient tank temperature
Insufficient rinsing.
Insufficient rinse temperature
The dish rack does not
advance
TROUBLESHOOTING
CAUSE
Main switch disconnected
Other possible causes
Water valve closed
The door is open.
Emergency button activated.
Cut-out switch activated.
Overflow pipe not inserted correctly. Check the correct insertion of the
Tank full for many hours, for
example not emptied since the
previous service
Dirty washing filters.
Clogged wash nozzles.
Wash arm caps missing or not
inserted correctly.
Advancement speed too high.
Machine
not
at
the
temperature.
Detergent
container
empty
detergent not suctioned.
Ineffective detergent
Incorrect dishes arrangement.
Curtains not present or not fitted
correctly
Insufficient
supply
temperature
Clogged rinse nozzles.
Insufficient
supply
temperature.
Limit switch activated.
An object is hindering advancement. Remove the object.
The drive slides.
SOLUTION
Turn switch on.
Contact the assistance service.
Open the valve.
Close the door.
Deactivate the emergency button.
Contact the assistance service.
overflow pipe.
Drain the tank completely and refill it.
Clean the filters (15/16 Fig. 8).
Clean the washing nozzles under
running water (17 Fig.8).
Insert the caps or position them correctly
(20 Fig.8).
Adjust the advancement to a slower
speed.
required
Wait for the tank water temperature to
be reached (50°C).
or
Refill or replace the detergent container.
Check that the detergent is for industrial
dishwashers and that the dosage is of
the correct concentration.
Check that the dishes do not overlap.
Check for presence or correct position.
water
Check that the temperature is as
prescribed 50-55°C.
Unscrew and clean the nozzles in
running water (18 Fig.8).
water
Check that the temperature is as
prescribed 50-55°C.
Remove the dish rack when it comes
out of the machine.
Contact the assistance service.
EN
29
Werbung
