Herunterladen Diese Seite drucken

SPALDING Portable System Bedienungsanleitung Seite 18

Werbung

2.
Visually identify each pole section (top, middle, bottom) and the orientation (front face) using illustrations below.
Poles have an identification sticker that should indicate the pole section top, middle, bottom.
Visuellement identifier chaque section de pôle (le sommet, le milieu, le fond) et l'orientation (le visage de devant)
utilisant des illustrations au dessous. Les pôles ont un autocollant d'identification qui devrait indiquer le sommet de
section de pôle, le milieu, le fond.
Identifizieren Sie visuell jeden Stangenabschnitt (Oberteil, Mitte, Boden) und die Orientierung (vorderes Gesicht)
benutzend Illustrationen unten. Stangen haben einen Identifikationsaufkleber, der das Stangenabschnittoberteil, Mitte
anzeigen sollte, Boden.
Identifique visualmente cada sección de asta (parte superior, el centro, el fondo) y la orientación (cara delantera)
utilizando ilustraciones abajo. Las astas tienen una pegatina de identificación que debe indicar la parte superior de
sección de asta, el centro, el fondo.
Pole
Identification
top
Sticker
supÉRIeuRe
obeN
supeRIoR
Pole
Identification
Sticker
4
Note oRIeNtAtIoN.
NoteZ l'oRIeNtAtIoN.
dIe KoRReKte AusRIchtuNG beAchteN.
Note lA oRIeNtAcIÓN.
mIddle
ceNtRAle
mItte
5
medIA
Pole
Identification
Sticker
ImpoRtANt!
ImpoRtANt!
WIchtIG!
¡ImpoRtANte!
18
bottom
INfÉRIeuRe
uNteN
seccIÓN INfeRIoR
6

Werbung

loading