Balluff BNI PNT-507-005-Z040 Betriebsanleitung Seite 78

Balluff Network Interface ProfiNet™
7 Web Server
7.3. Login/Logout
www.balluff.com
To make configuration settings on the fieldbus module using the web interface, you must first
log in. Functionalities which cannot be used without logging in are indicated by the grayed out
buttons.
The default password is:
BNI PNT-XXX-XXX-XXXX
BNI EIP-XXX-XXX-XXXX
BNI ECT-XXX-XXX-XXXX
The password cannot be changed!
After successfully logging in the dialogs are shown as follows:
Use the "Logout" button to log out again. After 5 minutes of no interaction with the Webserver
the user is automatically logged out.
Note
For security reasons the fieldbus module shows only one login at a time with
configuration access. Reading (without logging in) is however possible from multiple
PCs at the same time on the fieldbus module.
"BNIPNT"
"BNIEIP"
"BNIECT"
27