The Control Elements Of The Piko Smartcontroller - PIKO SmartControl light Bedienungsanleitung

light

2. The control elements of the PIKO SmartController

Overview
Display
The clearly structured high definition display shows the symbol of the current operating mode and the
locomotive or base address at the top of the display. In the middle it shows basic information about
the currently controlled locomotive. At the bottom you can find information about switching functions,
depending on the chosen mode.
The display clearly shows all the information about the locomotive, the speed, the driving direction and
the state of the locomotive's special functions or of the currently chosen operating mode (e. g. position
of the switches in the turnout mode).
Speed regulator
The hand controller is equipped with a rotary throttle knob to control the speed, the driving direction
and the emergency stop of the locomotive. It also allows you to choose the locomotive's data set as
well as the symbols and their position in the name of the locomotive.
The following part describes the different keys of the controller:
up / down ([▲] / [▼])
• In loco mode, changing of the special function blocks
• light, F1 - F8; light, F9 - F16; light, F17 - F24; light - F32.767 (activate in configuration mode)
• In turnouts mode, changing of the base address +8 or -8
• In routes mode, changing of the base address +8 or -8
• In configuration mode, changing of parameters
System
display
speed regulator
up
down
keypad
stop / delete
mode
lok
Enter
20
light