Ports; First Steps With The Piko Smartcontrol - PIKO SmartControl light Bedienungsanleitung

Ports

The digital central station is equipped with ports for a main track, a programming track, a reverse loop
relay and further Loco-Net
SmartBox
light
schw.
rot grün
programming track
The programming track serves only for the programming of DCC decoders. During operation it carries
no current and must not be connected to the main track.

1. First steps with the PIKO SmartControl

First, connect all components according to the following graphic.
SmartBox
Next, turn on the operating voltage by plugging the power supply into the power outlet. A switchable
multi-socket outlet can be beneficial.
The green control LED should now be turned on and the PIKO SmartController
loco mode.
devices as well as a port for the power supply.
®
LN-T LN-B
Prog. KS- Haupt
Gleis Relais Gleis
rot
+
rot
schw.
15V-
power
supply
main track
LN-T LN-B
Prog. KS- Haupt
light Gleis Relais Gleis
rot
+
schw. rot
schw.
rot grün
15V-
power
supply
light
19
light
should display the
light