Westfalia 85 93 12 Bedienungsanleitung Seite 34

Thicknessing
1. Place the hand crank on the
post on the planing table (1)
and turn it to adjust the thick-
nessing table (16) to the re-
quired height.
2. The set angle can be read from
the scale.
3. Switch on the machine by
pressing the green button "I".
4. Place the workpiece you want
to machine on the thicknessing
table. Do not overload the ma-
chine during work.
5. After work switch off the machine and disconnect the power
plug from mains.
 The contact surface of the workpiece must be flat for thick-
nessing.
All manuals and user guides at all-guides.com
Thicknessing
Pointer
30
Scale
Thicknessing Table