Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instruction
FUNCTION KEYS
DISPLAYS SYMBOLS
2
1. Hygrometer
:
|
-
MODE key:
2. Clock
COD
М
(ZED
Switch among Normal Time Mode, Month/Date/Day Mode and Alarm Time Mode.
3. LCD Display
°
Ak
JU. Y ży
4. Thermometer
2 oue У
Уве"
rame
SET key:
|
|
|
In Normal Time Mode, press and hold it for 3 seconds to enter time setting
GETTING STARTED
1
3
4
mode. In Alarm Time Mode, press and hold it for 3 seconds to enter alarm time
1. Remove the battery door by slightly pressing the knob upwards.
setting mode. In setting mode, press it to step the setting items.
2. Insert one new AAA size battery as per indication marked on the battery
compartment.
ADJUST key:
3. Close the battery door.
In Normal Time Mode or Date mode, press and hold it for 3 seconds to enter
4. When insert battery, all the segments of the LCD will be shown and the
the mode of adjusting the time to be same between Analog and Digital. In
time displayed on the LCD will be at 2:00, with the icon "D"( short for DSF
setting mode, change the value of the flashing digit. In Alarm Time Mode,
version), before entering the radio controlled time reception mode.
switch ALARM/SNOOZE function on or off.
5. In order to synchronize with the RC signal, analog time(hand) & digital
time(LCD) must be the same.
RECEIVE key:
6. When both time are exactly the same, it will start to scan and synchronize
Press itto receive the signal for reception testing.Check the signal strength
with the radio controlled signal after 8 seconds automatically.
indicator in the first 30 seconds. If the signal strength indicator is in acceptable
signal quality, fix the clock here. Otherwise, place the clock in other position
NOTE:
and press the RECEIVE key again, the reception will be off automatically after
1. Ifthere is no display on the LCD after insert battery, press "RESET" key
6-12 minutes. If the clock you purchase is JJY version, pressing RECEIVE key
to reset it. And due to atmospheric disturbances, the best reception often
can change the reception frequency during reception period.
occurs during nighttime.
2. In ex-factory mode, analog clock(hand) will be set at 2:00.
RESET key:
In case of mal-function, use a pin to press the RESET key to restart the clock.
PRODUCT DESCRIPTIONS
12345
1. MODE key
LLL
2. SET key
3.
ADJUST key
4. RECEIVE key
E:
CT
5. RESET key
e
}
10
11
00113913man de en fr it nl pl pt ru.indd 10-11
©
07.08.12 08:23
Werbung
