Scheppach GKS20 Originalbetriebsanleitung Seite 20

9. Operation
m ATTENTION!
Before use, check all connections and the HEPA fil-
ter (9) for a firm and secure connection. The contain-
er (4) and the HEPA filter (9) must be absolutely dry.
9.1 Switching on/off (Fig. 1)
The on/off switch (2) has two settings
• Switch setting 0: Off
• Switch setting I: On
9.2 Vacuuming ash
m ATTENTION!
Vacuuming glowing ash as well as flammable, ex-
plosive or hazardous substances is prohibited.
There is a danger of injury!
Always use the HEPA filter (9) for vacuuming ash. Al-
ways ensure that the filters are correctly fitted.
m ATTENTION!
The device is not suitable for vacuuming flammable
liquids.
10. Cleaning and maintenance
m WARNING! Pull out the mains plug before carrying
out any setting, servicing or repair work!
10.1 Cleaning
• Remove the machine head (1) by opening the lock-
ing hooks (3) and lifting the machine head from the
container (4).
• Empty the container (4).
• Pull the HEPA filter (9) off the machine head (1) and
tap it out.
• If necessary, clean the HEPA filter (9) under running
water and let it air dry completely.
• Mount the HEPA filter (9) and machine head (1) in
reverse order.
Maintenance
The device is maintenance-free.
Service information
With this product, it is necessary to note that the follow-
ing parts are subject to natural or usage-related wear,
or that the following parts are required as consuma-
bles.
20 | GB
Wearing parts*: HEPA filter
* may not be included in the scope of delivery!
Spare parts and accessories can be obtained from our
Service Centre. To do this, scan the QR code on the
front page.
Connections and repairs
Connections and repair work on the electrical equip-
ment may only be carried out by electricians.
Please provide the following information in the event
of any queries:
• Type of current for the motor
• Machine data - type plate
• Engine data - type plate
Spare parts and accessories can be obtained from our
Service Centre. To do this, scan the QR code on the
front page.
11. Transport
To transport the product, disconnect the it from the
power supply and set it up in the new position you want
to use it in.
The product must be secured against tipping and slip-
ping during transport in vehicles in order to prevent
damage and injuries.
12. Storage
Store the product and its accessories in a dark, dry and
frost-free place that is inaccessible to children.
The optimum storage temperature lies between 5 and
30 ˚C.
Store the product in its original packaging. Cover the
product to protect it from dust or moisture. Store the
operating manual with the product.
13. Electrical connection
The electrical motor installed is connected and
ready for operation. The connection complies with
the applicable VDE and DIN provisions.
The customer's mains connection as well as the
extension cable used must also comply with these
regulations.
www.scheppach.com