Christopeit Sport TM 750S Montage- Und Bedienungsanleitung Seite 15

Assembly Instructions
Unpacking and Operation
Beore usage, observe our recommendations and saety in-
structions.
Step 1:
Remove the treadmill (1).
Remove small parts, loose packing material out o the box and
then take out with help o a second person the preassembled
rame o packaging. Put your hands below the main rame (1) and
take care o no squeezing.
Step 2:
Unolding the support tubes (3+4)
Fold up the supports let and right (3+4) with care and lock up the
upright position o supports (3+4) by screw in the support screws
(30). (Make sure that the lock engages each other.)
Step 3:
Positioning the handles (6+7) and the computer (5).
ATTENTION: When assembly the hand bar, please attention the
hole on the hand bar is downward.
1. Put the let handle (6) in the direction as shown on the picture.
Use small rotary knob (57) with Isolation nylon pad (34) to lock the
handle tightly.
2. Right side same as let side. As shown on the picture.
3. Ater using or a time, i the handle is loose, please asten the
rotary knob (57) again.
4. Flip the computer (5) until the positioning pin (62) pops in.
15