5. Main menu
Software Update
Select this option if a new firmware is available. The latest firmware is always on our
homepage www.megasat.tv.
1. Copy the new firmware to a USB stick and plug it into the USB slot on the front of
the set-top box.
2. Select "USB upgrade", then a new window will appear in which the new firmware is
located (eg firmware.bin).
3. Select Firmware with the pq keys
and confirm with OK to start the
update process. WARNING: Never
disconnect the power supply to
the set-top box during the update
process!
4. After a successful update, the set-
top box restarts.
Network setting
In this menu item, you can make various
network settings if you have connected
a LAN cable.
Link Type (LAN)
Once you have plugged in a LAN cable and connected it to your Internet router, an Inter-
net connection is usually established automatically. The DHCP option should be enabled
for the IP settings to be assigned automatically. If you disable DHCP, you must set the IP
settings yourself. This option is recommended only for experienced users.
ENGLISH
17