ABB PowerValue 11 LI Pro Serie Bedienungsanleitung Seite 69

3 B AT T E R Y R E P L A C E M E N T
3 .2 .2
—
3.2.2-1: PowerValue
11 LI 1000, 1500 and
1. Switch off the UPS and disconnect all input/
2000 VA batteries
replacement procedure
output AC/DC power cords and
- Remove front panel
connections.
—
2. To remove the front panel (A), insert a flat
3.2.2-2: PowerValue
screwdriver (B) in the gap between front
11 LI 1000, 1500 and
2000 VA batteries
panel and body case,
replacement procedure
- Remove batteries
3. Remove the battery protection (C).
4. Pull out the batteries (D1/D2), and remove
the two flat spacers (F1/F2) between the
batteries (D1/D2).
5. Disconnect the battery wires (E).
A
—
3.2.2-1
—
3.2.2-2
For 1000, 1500 and 2000 VA models
GENTLY PRY THE FRONT PANEL
APART FROM THE BODY, WHILE
CAREFULLY REMOVING THE FRONT
COVER, PAY ATTENTION TO
NOTE
FRAGILE CABLES
A
3
+
D1
-
C
F1
+
D2
-
6. Dispose of the batteries properly (D1/D2).
7. Take a new batteries (D1/D2).
8. Make sure the red wire is secured to the red
battery pad and the black wire to the black
battery pad, and reconnect the battery
wires (E).
9. Insert the new batteries (D1/D2) into the
unit, and reconnect the two flat spacers (F1/
F2) between the batteries (D1/D2).
10. Reinstall the front panel (A).
DANGER
11. Reconnect all cables and switch on the UPS.
A
2
E
F2
E
DO NOT POWER UP THE UPS TILL
THE ENCLOSURE IS COMPLETELY
RE-ASSEMBLED . RISK OF ELECTRIC
SHOCK
A
1
B
A
69
3
en