Parkside PGK 1500 A1 Originalbetriebsanleitung Seite 34

GB MT
Troubleshooting
Problem
Appliance does not
start
In case of unusual
sounds
Poor work output
Device is having
diffi culties running
Strong vibrations
34
Possible cause
No mains power supply
Release button (
start handle ( 14) defective
Worn out carbon brushes
Defective motor
Chopper (7) blocked
Chopper (7) damaged
Loose or worn screws and nuts
or similar.
Chopper (7) fi tted incorrectly
Chopper (7) blunt or damaged Replace chopper (7)
Chopper (7) damaged
Working depth too low
Remedy
Check the socket, mains supply
cable, cord, mains plug; if
necessary, have them repaired
by a qualifi ed electrician.
Check the main fuse
13) and/or
Repair by Customer Care
Loosen blockages of the
chopper
Replace chopper
Check all screws, nuts etc.
for tightness and retighten if
necessary.
Contact Customer Care if the
noises persist.
Fit chopper correctly
Replace chopper (7)
Adjust working depth