Electrical Connection - Austria Email EKH-S Bedienungs- Und Montageanleitung

Electrical Connection

• Only qualified specialised personnel may connect the tank to fixed lines while
observing the relevant professional standards and laws.
• A ground fault circuit interrupter with a trip current of I∆n ≤ 30mA must be
installed upstream from the electrical circuit.
• Before working on the tank, this is to be de-energised, checked for the ab-
sence of voltage and secured against being switched on again.
• If a connection cable is damaged, immediately disconnect the power sup-
ply (circuit breaker) and call a professional!
• Connection cables may not be extended or cut through in any way.
• ATTENTION: The factory wiring must not be altered!
Servicing
• Maintenance, cleaning and any necessary repair or service work may only be
performed by specialised personnel who are qualified for this purpose.
• Never try to fix errors and faults yourself.
• Necessary service and maintenance intervals are to be observed in accordance
with these operating and assembly instructions.
EN
21