Electrical Safety; Using An Extension Cable - DeWalt DCB118 Bedienungsanleitung

E NGLIS H
BATTERY TYPE
DCB180
DCB181
DCB182
DCB183
DCB184
DCB185
DCB546

Electrical Safety

Always check that the battery pack voltage corresponds to the voltage
on the rating plate. Also make sure that the voltage of your charger
corresponds to that of your mains.
Your D WALT charger is double insulated in accordance with
e
EN60335; therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by a specially
prepared cord available through the D
Mains Plug Replacement (U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made to the earth
terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 3 A.

Using an Extension Cable

An extension cord should not be used unless absolutely necessary.
Use an approved extension cable suitable for the power input of your
54
VOLTAGE CELL
18 10 x Li-Ion
18 5 x Li-Ion
18 10 x Li-Ion
18 5 x Li-Ion
18 10 x Li-Ion
18 5 x Li-Ion
18/54 15 x Li-Ion
WALT service organisation.
e
CAPACITY
3.0 Ah
1.5 Ah
4.0 Ah
2.0 Ah
5.0 Ah
1.3 Ah
6.0 Ah/2.0 Ah