Menu Structure And Settings; Menu Tree - WIKA CTH6300 Betriebsanleitung

6. Commissioning, operation
For all measuring instruments the measuring channels can be selected
according to the model-specific measurement parameters. For the
version with only one probe the correct measurement parameter is
already set.
When using the measuring instruments with several channels and/or
different probes make sure that the correct measurement parameter is
set. See chapter 6.4.2 "Probe selection Prob".

6.3 Menu structure and settings

Instrument settings such as measurement parameters, probe calibration, channel
deactivation, arrow keys, etc. are adjusted using a menu tree. To open the main menu,
press the ENTER/MENU key. Use the arrow keys ▲▼ to select the required menu items.
Press ESC to return to the measuring mode.

6.4 Menu tree

Unit Prob
°C P
°F J
m/s K
%rh L
g/m³ N
°C td R
°F td S
Pa T
hPa RH
m³/s D
Pr
H
WIKA operating instructions, models CTH6300 and CTH6500
Lin2 CAL
T1-T2 OFF
oP1
oP2
Chnl ArEA
OFF c
ON m
GB
Lo6
OFF
ON
21