RSG 400 Serie Gebrauchsanweisung Seite 7

RSG Full Mask User Manual June 2012aw :Layout 1 12/06/2012 13:39 Page 7
DISINFECTION:
Disinfect the mask components in a suitable solution after use. Use a disinfectant such
as "MULTIDOR". Follow the instructions carefully (refer to disinfection intervals in table
2, page 9).
DRYING:
The mask should be air-dried or dried in a drying cabinet at a temperature not exceeding
60°C. Avoid direct sunlight.
STORAGE:
Loosen the mask straps as much as possible.
Avoid deformation. Remember to use the storage brace in the full face mask during
storage.
Store the mask in airtight and light-proof packaging in a cool and dry place.
Storage and operating temperature: -10
.
NOTE !
Silicone has a tendency to absorb detergents and disinfectants. Irritation of the
skin can occur as a result.
Therefore:
1. Reduce the time the substances are in contact with the mask, which is
stated in the instructions, to a minimum.
2. Rinse thoroughly in running water for 10 minutes, after cleaning and
disinfection of the mask 40 01 01.
DISINFECTION - DRYING - STOR GE
o C - +50 o C. Relative humidity <95%
(GB) 6
copyright 2018 ©