Kinetec 6080 Bedienungsanleitung Seite 8

6 • ADJUSTING THE LIMITS
The physician positions the cursors (13) and (14) on the
threaded rod and locks them with the safety nuts (15) and
(16).
The graduated scale placed on the screw drive casing gives
only an approximate measurement.
7 • USE OF THE KINETEC HYGIENIC PADS
Place the pads (17) and (18) on the adhesive parts of the forearm and arm support, with the sponge side up.
FOR OPTIMAL HYGIENE, A NEW SET OF PADS SHOULD BE USED FOR EACH PATIENT.
The straps (19) and (20) are used for holding patient's arm on the machine. Do not use strap (19) when machine is used for pronation-
supination.
For glove use, see the drawing.
For cleaning, see paragraph 12.
Part number to order pads : 4650000646
Part number to order glove : 4650000654
8 • SETTING UP THE PATIENT
- Make sure that clean pads are on the machine (see section 7 and
12).
- Place the patient comfortably in a sitting or reclining position.
- Place arm into the machine, in the maximum tolerable flexion.
- Adjust the height ot the machine on the telescopic column (C) and
the incline of the toothed link (2).
- Adjust the joint axis of elbow and the joint axle of the machine.
- Lock casters of base (G).
- Place the pronation-supination hand grip (E) in the palm of hand
with hand in supine position.
- Fix the top of arm with the strap (20)(Fig.7)