Description; Tools And Accessories; Technical Data - Hilti WSC 255 Bedienungsanleitung

2. Description

The WSC 155 is an electrically powered hand-held tool
designed for sawing wood, plastics and composite mate-
rials. It is intended for professional use.
The following items are supplied:
– Circular saw with blade
– Operating instructions
– Packaging
Correct use
● The tool is designed for cutting through, cutting
grooves and cutting into wood, wood-like materials,
plaster- and cement-bonded fibre materials and plas-
tics.
● The working environment may be on a construction
site or in a workshop and may consist of renovation,
conversion or new building work.
● The working environment should be dry.
● The tool may be operated only when connected to a
power supply providing a voltage and frequency in com-
pliance with the information given on its rating plate.
● Sawing metals is not permissible.
● Do not use the tool for cutting branches off trees or
for cutting logs.

4. Technical data

Rated power input
Rated voltage ✱
Mains frequency
Rated current input ✱
Weight as per EPTA-Procedure 01/2003
Dimensions(L×W×H)
Spindle speed under no load
Spindle speed under load
Blade peripheral speed under load
Cutting depth at 90°
Cutting depth at 45°
Riving knife thickness
Electrical protection class (as per EN 60745 )
Interference immunity
Radio and television interference suppression
Vibration absorbing grip
✱ The tool is available in different versions for various mains voltages. Please refer to the information on
the type plate for the nominal voltage and nominal current input of your tool.
12
Printed: 07.07.2013 | Doc-Nr: PUB / 5071323 / 000 / 00
● No changes or modifications may be made to the tool.
● To avoid the risk of injury, always use only original
Hilti accessories.
● Do not make use of incorrect accessories (e.g. the
wrong circular saw blade, the wrong extraction con-
nector or the wrong type of vacuum cleaner).
● Observe the information given in the operating instruc-
tions concerning operation, care and maintenance.
● The tool may be operated, serviced and repaired only
by authorised, trained personnel. This personnel must
be informed of any special hazards that may be encoun-
tered.
● The tool and its accessories may present hazards
when used incorrectly by untrained personnel or when
misused.

3. Tools and accessories

– Parallel guide, auxiliary grip, rotatable chip ejector
– Toolbox
– Range of saw blades
– Industrial vacuum cleaner
1100 W
110 V 230 V
50/60 Hz 50/60 Hz
10.0 A 4.8 A
3.7 kg
310×250×240 mm
4200 r.p.m. 4400 r.p.m.
2650 r.p.m. 2800 r.p.m.
22 m/s 23 m/s
10–55 mm
10–42 mm
1.2 mm
Class II (double insulated) Z
as per EN 55014-2
as per EN 55014-1