Gude GC 140 Originalbetriebsanleitung Seite 16

ENGLISH
16
Technical Data
Welder GC 140
Art. No ...............................................................................................................................................................................................20046
Service connection .......................................................................................................................................230 V ~ 50-60 Hz
Rated input voltage AC Voltage U
Protection ................................................................................................................................................................................ 16 A
Idle voltage U ....................................................................................................................................................................................80 V
0
Degree of protection.................................................................................................................................................................... IP 21S
Insulation class ........................................................................................................................................................................................ H
Weight ..................................................................................................................................................................................7,07 kg
..................................................................................MMA
Switch-on timeX* ...............
Welding current I
Operating voltage U
Material thickness ................ 0,8-12 mm/ Wig 05-2 mm
Regulated section .................................. 10 A-140 A
Electrodes ................................................... 1,6- 4 mm
* Actual working time and total working time ratio.
Switch-on time determined at 40°C using simulation
the safety measures stated in the service manual. Act
responsibly toward third parties.
In case of any doubts about connection and
operation refer please to our customer center
Specified Conditions Of Use
Welder in protective atmosphere for thermal connec-
tion of ferrous metals by melting edges and including
mixture
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Safety instructions
WARNING! Electric shock! There is a risk of
an injury caused by electric shock!
Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).
.......................................................................................................................................... 230 V
1
140A~30% | 100A~60% | 90A~100%
.........................................................140 A
2
....................................... 20,4-23,2 V
2
Read and understand the
operating instructions before
using the appliance. Abide by all
IP21 protection degree of the welder. The welder
must not be exposed to rain and moisture when
being operated or stored.
Check the voltage. Technical data given on the type
label must correspond with electric network voltage.
Insert the plug of the electrical cable in a socket of
suitable shape, voltage and frequency complying
with current regulations.
Use extension cables with a maximum length of 5
meters and with a cable cross-section of not less than
1.5 mm . Use of extension cables of different length
2
and cross-section and also of adapters and multiple
sockets should be avoided.
Check the cable and/or socket for damages before
the appliance putting into operation.
Defective cable or plug may cause electric shock.
Do not pull the service cable to pull the plug out of
socket.
Do not expose yourself or other persons without pro-
tection to electric arc or hot metal. Spraying welding
pearls may cause burns.
A suitable welding shield, protective clothes and
protective gloves to be worn at all times.
Long-term inhalation of welding gases may be harm-
ful to your health.
Work with an exhaust system or in well ventilated