Fuxtec FX-RM Serie Original Bedienungsanleitung Seite 51

Original User Manual FUXTEC FX-RM Series_de_en_fr_ita_es_rev24
- Never start the engine if the oil is spilled. Move the device to another location. Avoid any kind of ignition
- Inspect the blades, bolts, and cutters for visible wear and damage before using the device. Replace worn
- Never change the safety devices. Check their proper function regularly.
- Keep the device free from grass, leaves, and other residues. Remove any oil or fuel residues. Let the
- Be incredibly attentive when changing the mowing direction on slopes.
- Never attempt to adjust the cutting height while the engine is running.
- The crop catcher and its parts are subject to wear, damage, and abrasion, which could expose rotating
parts. This can lead to objects being thrown. Check the individual parts regularly and, if necessary, replace
them with original spare parts recommended by the manufacturer.
- The blades are sharp and cut precisely. Be careful when servicing the blades. Wrap the blades in a cloth
- Do not change the engine speed controller and do not overload the motor
- Be especially careful when moving the mower backward or towards you.
- Stop the blades when the mower needs to be tilted for transport, especially when crossing surfaces
- Disconnect all blades and control clutches before starting the engine.
- Start the engine carefully as described in the instructions, keeping your feet away from the blades
- Do not tilt the lawnmower when you turn on the engine, except when the lawnmower needs to be
inclined to start. In this case, you should not tilt it more than necessary. Only lift the part that is away
- Do not start the engine if you are standing in front of the outlet duct
- Never transport or carry a lawnmower while the engine is still running.
- Reduce the brake setting while turning off the engine and if the engine is equipped with a shut-off valve.
Turn off the fuel supply at the end of the mowing operation. Go slowly when using a transport device.
the engine is running or still hot.
or sparking until the petrol fumes are entirely removed.
- Carefully replace all fuel tank and container caps
or damaged blades and bolts in sets to avoid imbalance.
device cool down before storing it.
or wear protective gloves.
other than grass.
from the user.
51