Moulinex My Daily Soup LM542810 Bedienungsanleitung Seite 17

PROBLEMS
Excessive vibrations
Leak at the top of the
jug.
Poorly-mixed preparations.
The appliance has cut the
electricity supply.
Your appliance beeps
continuously, all the LEDs
flash and cdE1 or cdE2 is
displayed on the screen
The food is not properly
cooked or something is
caught at the base of
the jug.
CAUSES
The appliance has not been
placed on a flat surface; the
appliance is not stable.
Volume of ingredients is
too high.
Overflow sensor (C) is
clogged up.
Volume of ingredients is
too high.
Pieces of food are too large
or too hard.
Stop the motor using the
motor overload protector.
Appliance is damp.
Fouled up overflow sensor
(C)
Your appliance is equipped
with a level sensor (C).
Volume of ingredients is too
great.
You have not selected the
right programme.
Not enough or too much
liquid.
Ingredients not blended
properly.
You have used the appliance
to heat up milk.
SOLUTIONS
Place your appliance on a
stable,flat heat-resistant,
clean, and dry surface.
Reduce the quantity of
ingredients processed.
Clean sensor (C).
Reduce the quantity of
ingredients processed.
Reduce the size or quantity of
ingredients processed.
Leave your product to cool
down for at least 20 minutes
and reduce the size or quantity
of ingredients processed.
Add liquid.
Leave the appliance to dry for
24 hrs before trying to connect
again.
Clean the sensor (C)
Reduce the quantity of
ingredients.
Do not exceed the maximum
level (fig 3) of ingredients.
Start again, choosing the right
programme.
Check that the liquid is between
the MIN and MAX levels for
settings P1 and P2 (fig 3).
For P3, ensure there is between
150ml and 300ml of liquid.
Stir the liquid and ingredients
together manually (fig 4).
The soup-maker is not
appropriately-designed to do
this.
EN
17