Flue Pipes; Cleaning At The End Of The Season - Gude GP 135 B Originalbetriebsanleitung

English
36
#
7) Remove the tube...
8) ... and remove the 4 screws on the cover.
9) The fan can now be removed and the dirt can be
cleaned out of the inside using a vacuum cleaner.
Only
use a brush attachment for the fan!
10) Now put the furnace back together in reverse
order.
Reset "service" interval for servicing
To get to the menu selection, press the 1 and 6 but-
tons at the same time for 6 seconds. Confirm the "Test
Programme" by pressing 1. Press the 6 or 7 button
until "Hours (operating hours)/Serv (service hour
counter)" appears on the display. Now press buttons
4 and 5 and hold them down for 5 seconds. The
service counter has now been reset. Exit the menu by
pressing 3.
Cleaning the flue pipes
Clean the flue pipes on your fireplace at least once
a year
.

Cleaning at the end of the season

Carry out all the cleaning processes that have been
described at the end of the season.
In order to empty the screw conveyor, carry out the
initial loading process without adding any more
pellets. The pellets still in the screw conveyor are then
released.
Service
Even after you have made your purchase, our service team
will be happy to help with anything you may need!
You can reach us on Mondays-Fridays between 9 am and 6
pm and on Saturdays between 8 am and 12 noon. Please
find our contact details below:
Phone: 07904/700-360
Fax: 07904/700-51999
Email: support@ts.guede.com
Tip: It is convenient to order spare parts via our online shop
at www.guede.com
We will provide you with support: Either on-site or via our
central
customer service team in Wolpertshausen.
You can find out more in our
warranty conditions.
GP 135