MSW Motor Technics MSW-BS950S Bedienungsanleitung Seite 34

3.1. Device description
3.2. Preparing for use
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative humidity should be less than 85%. Ensure
good ventilation in the room in which the device is being used. There should be at least 10 cm distance between each side of
the device and the wall or other objects. The device should always be used when positioned on an even, stable, clean,
fireproof and dry surface, and be out of the reach of children and persons with limited mental and sensory functions.
Position the device such that you always have access to the power plug. The power cord connected to the appliance must be
properly grounded and correspond to the technical details on the product label.
3.3. Assembling the device
3.3.1. Work Table
1. Remove the two screws, two knurled nuts and U shape block from the work table.
2. Guide work table over the blade and place it on the table trunnion. Position the table insert on the work table properly.
3. Attach the work table with three each screws M6×16 to the table trunnion.
1. Main Machine
2. Push Stick
3. Work Table
4. Rip Fence
5. Table Insert
6. Operator's Manual
7. Allen Key, 4mm
8. Allen Key, 3mm
9. Blade Key
10. Lamp (optional)
11. Hardware Bag