2.4 Carbon filter
WARNING! Unplug the appliance or disconnect it from the mains (use
the relevant fuse in your household fuse box).
WARNUNG! Use the carbon filters in recirculation mode only.
1. Remove the grease filter(s). The
carbon filters are intended to be
installed on both sides of the
motor.
2. Please note the following illustration:
L
Turn to the left = Remove a previously installed carbon filter.
R
Turn to the right = Place the carbon filter on the motor and turn the filter
to the left slightly or jerk it carefully until the filter is installed properly.
M
Motor
3. Match the brackets of the filter with the holding mechanism of the motor and
jerk carefully until the filter locks.
Filter-brackets
Carbon filter (installed)
Bracket (holding mechanism on
the motor)
Holding mechanism/motor
31