Initialisation Of All The Parameters - Dimplex BRTU 201 F Bedienungsanleitung

15.2 Initialisation of all the parameters

This mode resets all the configuration parameters, settings,
and programming. Only the date and time are kept.
From the shutdown mode ( ).
Ê Press the left button and the
i
button simultaneously for 20 seconds.
After 10 seconds, the screen displays "Init",
keep pressing until "ALL" is displays.
Ë Press and hold the OK button for 3 seconds.
The "Init" and "ALL" information flashes.
The values and settings are initialised.
- 51 - - 51 -
EN
>20s
>3s