251-10/B Cooker Hood Installation; Unit Mounting And Cooker Hood Wiring - SystemAir SAVE VTR 100/B Betriebs- Und Wartungsanleitung

16
| Installation
In case the depth of cabinets is much greater than the unit, install wooden blocks (pos. W) to compensate the missing
distance (figure 6, pos. B). Then install the mounting bracket on the upper block. Choose thickness of blocks according
to your needs.
Thickness of wooden blocks should be 25–100 mm. If needed distance is lower than 25 mm, adjust bolts instead of us-
ing wooden blocks (see figure 15).
Caution
Be sure to select the appropriate type and length of the screws so that they could hold additional wood
blocks and the unit itself.
6.3.2

251-10/B cooker hood installation

Product name and number
• 251-10/B White Cookerhood – 96698
• 251-10/B Stainless Cookerhood – 96699
The cooker hood must be installed to the wall/cupboards
first before it can be mounted on the wall because the
cooker hood power supply and control cables at the back
must be led to the top and already mounted SAVE VTR
100/B unit will block access.
Follow instructions delivered with the cooker hood how to prepare it before installation.
1. Connect the cooker hood to the unit via a flexible duct. Use mounting mechanism which is delivered together with
the cooker hood (figure 1, pos. X).
6.3.3

Unit mounting and cooker hood wiring

1. Pull the cooker hood power supply and control cables to the top since the mounted SAVE VTR 100/B unit will block
access to the back.
Fig. 7 Placing the unit on the mounting bracket (the cooker hood is not shown)
Fig. 1 Installation of the cooker hood
GB
212193 | v04