Personnel Qualification; Symbols On The Product - HEIDENHAIN GAGE-CHEK 2000 Installationsanleitung

2.5

Personnel qualification

The personnel for mounting and installation must be
appropriately qualified for this work and must have
obtained sufficient information from the documentation
supplied with the product and with the connected
peripherals.
The personnel required for the individual activities to be
performed on the product are indicated in the respective
sections of these instructions.
The personnel groups are specified in detail as follows
with regard to their qualifications and tasks.
Qualified personnel
The qualified personnel are trained by the operating
company to perform advanced operation and
parameterization. The qualified personnel have the
required technical training, knowledge and experience and
know the applicable regulations, and are thus capable of
performing the assigned work regarding the application
concerned and of proactively identifying and avoiding
potential risks.
Electrical specialist
The electrical specialist has the required technical
training, knowledge and experience and knows the
applicable standards and regulations, and is thus
capable of performing work on electrical systems and
of proactively identifying and avoiding potential risks.
Electrical specialists have been specially trained for the
environment they work in.
Electrical specialists must comply with the provisions of
the applicable legal regulations on accident prevention.
2.6 Obligations of the operating
company
The operating company owns or leases the device and
the peripherals. At all times, the operating company is
responsible for ensuring that the intended use is complied
with.
The operating company must:
Assign the different tasks to be performed on the
device to suitable, qualified and authorized personnel
Verifiably train the personnel in the authorizations and
tasks
Provide all materials and means necessary in order for
the personnel to complete the assigned tasks
Ensure that the device is operated only when in
perfect technical condition
Ensure that the device is protected from unauthorized
use
20
2.7 General safety precautions
The safety of any system incorporating the
use of this product is the responsibility of the
assembler or installer of the system.
The product supports the use of a wide
variety of peripheral devices from different
manufacturers. HEIDENHAIN cannot make
any statements on the specific safety
precautions to be taken for these devices. The
safety precautions provided in the respective
documentation must be observed. If there
is no documentation at hand, it must be
obtained from the manufacturers concerned.
The specific safety precautions required for the individual
activities to be performed on the product are indicated in
the respective sections of these instructions.
2.7.1

Symbols on the product

The following symbols are used to identify the product:
Symbol Meaning
Observe the safety precautions regarding
electricity and the power connection before
you connect the product.
Functional ground connection as per
IEC/EN 60204-1. Observe the information
on installation.
Product seal. Breaking or removing the
product seal will result in forfeiture of
warranty and guarantee.
HEIDENHAIN | GAGE-CHEK 2000 | Installationsanleitung | 06/2021