PS 3.34
HAzARd: HAzARdouS
VAPoRS
Paints, solvents, and other materials
can be harmful if inhaled or come in
contact with body. Vapors can cause
severe nausea, fainting, or poisoning.
PReVeNTIoN:
Wear respiratory protection when spraying.
•
Read all instructions supplied with the mask
to be sure it will provide the necessary
protection.
All local regulations regarding protection
•
against hazardous vapors must be observed.
Wear protective eyewear.
•
Protective clothing, gloves and possibly
•
skin protection cream are necessary for the
protection of the skin. Observe the regulations
of the manufacturer concerning coating
materials, solvents and cleaning agents in
preparation, processing and cleaning units.
HAzARd: GeNeRAL
This product can cause severe injury
or property damage.
PReVeNTIoN:
Follow all appropriate local, state, and
•
national codes governing ventilation, fire
prevention, and operation.
Pulling the trigger causes a recoil force to the
•
hand that is holding the spray gun. The recoil
force of the spray gun is particularly powerful
when the tip has been removed and a high
pressure has been set on the airless pump.
When cleaning without a spray tip, set the
pressure control knob to the lowest pressure.
Use only manufacturer authorized parts.
•
User assumes all risks and liabilities when
using parts that do not meet the minimum
specifications and safety devices of the pump
manufacturer.
ALWAYS follow the material manufacturer's
•
instructions for safe handling of paint and
solvents.
Clean up all material and solvent spills
•
immediately to prevent slip hazard.
Wear ear protection. This unit can produce
•
noise levels above 85 dB(A).
Never leave this equipment unattended. Keep
•
away from children or anyone not familiar
with the operation of airless equipment.
Device weighs in excess of 36 kg. Three-
•
person lift is required.
•
Do not spray on windy days.
The device and all related liquids (i.e. hydraulic
•
oil) must be disposed of in an environmentally
friendly way.
safety precautiOns
37