Cleaning The Air Filters; Optional Accessories - Makita VC2211MX1 Betriebsanleitung

Installing the air filter
Wipe off the seal face.
Set the new air filters and fix them with the filter hooks.
(Fig. 24)
Flip the stopper lever to lock the air filters.
Set the tank cover onto the tank and lock it with hooks.
(Fig. 25)
NOTICE:
• Make sure the hooks on the filters are set at the correct
position.
Cleaning the level sensors (Fig. 26)
The level sensors detect liquid when the tank becomes
full with liquid. Clean the level sensors with a soft cloth
from time to time when changing the air filters.

Cleaning the air filters

Clogged filter causes poor suction performance.
Clean out the filters from time to time.
To remove dust or particles adhering to the filters, remove
the prefilter from the air filter. And tap the prefilter several
times.
Occasionally wash the powder filter in water, rinse and dry
thoroughly in the shade before use. Never wash filters in a
washing machine. (Fig. 27)
NOTE:
• Do not rub and scratch the powder filter, the prefilter, or
damper with hard objects such as a brush and a
paddle.
• The filters are consumable and are recommended to
have some spares for them.
Storage of power supply cord (Fig. 28
& 29)
Wind up the power supply cord around the multi-hook or
the base hook.
Storage of accessories
NOTE:
• Do not apply an excessive force to the accessories that
are held by the pipe holder. Applying an excessive
force to these accessories may cause damage to the
pipe holder.
Pipe rest can be used to store straight pipe, bent pipe and
others by just inserting these accessories. (Fig. 30)
The pipes can be placed into the pipe holder when also
stopping using the cleaner on the way for a while.
(Fig. 31)
You can place the cap in multi hook while the hose is
connected to the tool. (Fig. 32)
Storage of hose (Fig. 33 & 7)
The hose can be placed on either base hook or
multi-hook.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
12

OPTIONAL ACCESSORIES

CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Hose
• Front cuffs (22, 24, 38)
• Straight pipe
• Corner nozzle
• Round brush
• Powder filter
• Damper
• Prefilter
• Nozzle assembly
• Bent pipe
• Polyethylene bag
• Filter bag
• Hose band
• Belt hook complete
• Cap
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ from
country to country.
Noise
The typical A-weighted noise level determined according
to IEC60335-2-69:
Sound pressure level (L
Uncertainty (K): 2.5 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to IEC60335-2-69:
The vibration emission value is below 2.5 m/s
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
ENG905-1
): 72.5 dB (A)
pA
ENG900-1
2
.