Gb Troubleshooting - HOP-SPORT Leaf HS-035h Bedienungsanleitung

GB Cleaning and maintenance
1. Regular maintenance of the device should be considered. It should be carried out at least every 20 hours of operation of the device.
2. Maintenance includes:
• checking on moving parts of the equipment and keeping them greased. It is recommended to use bicycle bearing greases or multi-component
greases for fitness equipment,
• taking care of other parts of the device, i.e.tightening bolts and nuts,
• checking power cords (if present in the device) for damage.
3. To clean the equipment it's recommended to use a soft cloth slightly moistened with water or possibly with soap and water. Do not use strong
substances or sharp cleaning materials that can damage the equipment. Particular care should be taken with plastic components.
4. After each use, remove all traces of sweat and dirt from the device.

GB Troubleshooting

Problem
The computer doesn't display data.
The device makes disturbing sounds
during use.
The computer doesn't display
the heartbeat or the values are
incorrect.
The product is unstable.
Disassemble the computer and check if the cables are correctly connected and are not damaged.
Check if all parts of the device are installed correctly. Tighten the screws.
1. Make sure that the pulse sensor and computer cables are properly connected.
2. To ensure correct pulse reading, hold both hands on the sensors. Remember that the
measurements may be slightly inaccurate.
3. Do not clamp your hands on the sensors too much as it may cause measurement errors.
Adjust the position of the device with the leveling feet.
49
Possible solutions