Cleaning And Maintenance; Accessories And Replacement Parts; What If There Are Problems - Beurer FC 25 Gebrauchsanweisung

6.2 Choosing and fitting a brush attachment
The device has 2 different attachments.
Cleaning attachment: For daily cleansing
Exfoliation attachment: For exfoliating in the shower and in the
bath in order to gently remove excess skin cells
1. Carefully fit your desired attachment onto the body brush as
shown until you can hear and feel it click into place.
2. To remove the attachment again after use, pull it carefully off
the body brush.
C
7. USE
7.1 Cleansing treatment function
The cleansing treatment function using the cleansing attachment
is ideally suited to daily cleansing of the skin.
To start the cleansing treatment function, proceed as follows:
1. Ensure that the cleansing attachment is attached to the body
brush.
2. To switch on the body brush, press the ON/OFF/speed button.
The cleansing attachment starts to rotate. We recommend that
you start by using the slow speed setting. To choose the fast
speed setting, press the ON/OFF/speed button again.
3. Gently move the body brush in circular motions over your skin.
Start with your feet and work upwards from there in the direction
of your legs, buttocks, stomach, back, chest, arms and hands.
Do NOT use the body brush on the face or in the pubic area.
If the treatment is unpleasant, stop using the device or reduce
the speed setting.
To ensure comfortable treatment, do not press the ro-
tating brush attachment too firmly on to the skin. Treat
each section of skin for a maximum of 20 seconds.
4. To end the cleansing treatment function, press the ON/OFF/
speed button again. The body brush switches itself off.
7.2 Exfoliation treatment function
The exfoliation treatment function using the exfoliation attach-
ment is ideally suited for gentle exfoliation to remove dead or dry
skin cells. Do not carry out treatment more often than 2x a week.
Always carry out the exfoliation treatment in the shower or bath.
To start exfoliating, proceed as follows:
1. Ensure that the exfoliation attachment is attached to the body
brush.
2. Moisten the exfoliation attachment.
3. Moisten your skin.
4. Apply a shower gel or cleansing lotion directly onto the bristles
of the exfoliation attachment.
5. To switch on the body brush, press the ON/OFF/speed button.
The exfoliation attachment starts to rotate. We recommend that
you start by using the slow speed setting. To choose the fast
speed setting, press the ON/OFF/speed button again.
6. Gently move the body brush in circular motions over your skin.
Start with your feet and work upwards from there in the direc-
tion of your legs, buttocks, stomach, back, chest, arms and
hands. Do NOT use the body brush on the face or pubic area.
If the treatment is unpleasant, stop using the device or reduce
the speed setting.
To ensure comfortable treatment, do not press the ro-
tating brush attachment too firmly on to the skin. Treat
each section of skin for a maximum of 20 seconds.
7. To end the exfoliation treatment function, press the ON/OFF/
speed button again. The body brush switches itself off.
8. Cleanse your skin thoroughly with water to remove any resi-
due from your skin.
9. Pat your skin dry with a towel and then apply a moisturising
cream using even, circular movements.
10. Clean the attachment thoroughly with water after each use.
B

8. CLEANING AND MAINTENANCE

8.1 Cleaning the attachments
IMPORTANT
Before beginning cleaning, pull the attachment off the body
brush.
• Clean the attachment thoroughly with water after each use.
8.2 Cleaning the body brush
• Clean the body brush using only the methods specified.
• Clean the body brush after use with a soft, slightly damp
cloth. If it is very dirty, you can also moisten the cloth with
a mild soapy solution. Do not use any abrasive cleaning prod-
ucts.
• Protect the body brush from knocks, moisture, dust, chem-
icals, drastic changes in temperature and nearby sources of
heat (ovens, heaters).
8.3 Replacing attachments
• In order to ensure optimum cleansing of your skin, we recom-
mend that you replace the attachments after 4 months of use.
9. ACCESSORIES AND REPLACEMENT
PARTS
Available commercially or from the relevant service address (as
specified in the service address list).
Brush type
Cleansing
attachment
Exfoliation
attachment

10. WHAT IF THERE ARE PROBLEMS?

Problem
The device will
not switch on.
The device
does not
cleanse as
well as it did to
begin with.
If you cannot find a solution to your problem here, contact our
Customer Services.
10
Replace Item number and/
or order number
After 4 months 605.14
After 4 months 605.15
Solution
Replace the batteries as described in these
instructions for use. If it is still not possible
to switch on the device, contact Customer
Services.
The attachment's bristles are worn. Replace
the attachment. If you do not have any repla-
cement attachments, they can be reordered
(see "10. Accessories and replacement
parts").