B) Gps / Speed Camera Detector Installation - TrueCam A7s Benutzerhandbuch

b) GPS / Speed camera detector installation

Insert GPS / Speed camera detector module into the camera holder, as in the picture bellow:
Install the device on the windshield with the sticker or the sucker holder.
When the device is powered, speed camera detector speaker will provide voice instructions from the speed camera
detector speaker, and the device will automatically start to receive GPS signal.
When the GPS signal is not available, GPS icon " " will be shown on the LCD display.
When connected to a GPS satellite, GPS icon " " will be shown on the LCD display.
Note: GPS module works properly only when it is plugged into the DVR mount adapter that is connected
to a power into the car lighter.
When you want to change the voice alert setting, the GPS module must be connected to power into the car lighter
according to the notes above.
Updating the database of radars and voice alerts can be found at: www.truecam.com/firmware/
6