"Slider" Zone: To Set Power And Timer Values; Starting-Up; Pan Detection - Küppersbusch KI8800.0GR Bedienungsanweisung Mit Montageanweisungen

"SLIDER" zone: to set power and timer values

The slider works like a touch key. Once your finger is placed onto the slider, you can slide to the
right hand or to the left hand side, in order to adjust the displayed value. As soon as the expected
value has been reached, you can remove your finger from the slider.
To select the power, you can either slide your finger on the slider zone, or directly access a
particular level if you put your finger directly on the chosen level.

Starting-up

•
Start up / switch off the hob:
Action
To start
To stop
•
Start up / switch off a heating zone:
Action
To set
(adjust the power)
To stop
If no action is made within 10 second the electronics return to the waiting position.

Pan detection

The pan detection ensures perfect safety. The induction doesn't work:
• If there is no pan on the heating zone or if this pan is not suitable to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a suitable pan is put on the heating zone.
• If the pan is removed from the heating zone. The operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back on the heating zone. The
cooking continues with the power level set before.
After use, make sure that the heating elements have been switched off: don't leave the pan
detection [ U ] active.
press
Control panel
press key [
press key [
Control panel
slide on the "SLIDER"
to the right or to the left
slide to [ 0 ] on "SLIDER"
slide
] (1 sec)
]
28
Display
[ 0 ]
nothing or [ H ]
Display
[ 1 ] to [ 9 ]
[ 0 ] or [ H ]