Maintenance - ruegg AXINIT Bedienungsanleitung

AXINIT, LARIMAR
& ECO 720

16 Maintenance

Figure 1
Figure 2
Instruction Manual
C-shaped slide
Guide roller
Upper roller
Lower rollers
Wait until the system has completely cooled down
before any maintenance operations.
Protect the chimney enclosure and the flooring.
Door hinge-side guide (figure 1)
The door hinge-side guide should be cleaned and lubricated
at least twice a season and more frequently if the fireplace
is used intensively.
Proceed as follows:
1 Raise the glass door completely
2 Use a cloth to clean the visible part of the inner sur-
face of the C-shaped profile
3 Lubricate the whole of the inner surface of the C-
shaped slide, with the Rüegg DW-40 multi-spray
provided in the installation kit
4 Lower the door and open it
5 Lubricate the upper and lower guides using
the Rüegg DW-40 multi-spray provided in the instal-
lation kit
6 Close the door and slide it fully up and down a few
times
7 Repeat operations 3 and 5 if necessary
8 Use a cloth to wipe off any Multispray that might have
collected at the end of the C-shaped slide
Door lock-side guide (figure 2)
The door lock-side rollers should be cleaned and lubricated
at least twice a season and more frequently if the fireplace
is used intensively
Proceed as follows:
1 Open the door (instructions on page 11)
2 Use a cloth to clean the upper and lower rollers.
3 Lubricate the upper and lower rollers using
the Rüegg DW-40 multi-spray provided in the instal-
lation kit
4 Turn each roller several times in both directions
5 Use a cloth to wipe off any Multispray that has collected
39