Husqvarna 2-48DS Bedienungsanweisung Seite 14

2. Adjust the height of the brush list seal and tighten
the screws.
Abrasive material
Speak to your Husqvarna dealer for the selection of
correct abrasive material for your surface operation.
Approved abrasive material on page 28 .
Refer to
Separator
The separator holds the abrasive material and supplies
the blast wheels with abrasive material.
The separator tray collects contamination from the
abrasive material and keeps contamination away from
the blast wheels.
14
To fill the product with abrasive
material
WARNING:
protective equipment during operation. Refer
Personal protective equipment on page 7 .
to
1. Make sure that the valves for the abrasive material
are closed. Refer to
abrasive material on page 12 .
2. Lift the lid at the handles to open the separator.
Always use personal
To operate the valves for the
2118 - 001 - 27.06.2023