Cable Diameter And Cable Cross-Sections - HomeMatic IP HmIPW-FAL230-C6 Installations- Und Bedienungsanleitung

Start-up
Please note the insulation stripping length of the
conductor to be connected, indicated on the de-
vice.
Please observe the hazard information in section
„2 Hazard information" on page <?> during in-
stallation.
6.2

Cable diameter and cable cross-sections

Permitted cable diameter for the cable bushings of the
floor heating actuator are:
Cable bushings
1 (L) (see fig. 2)
2 (M) (see fig. 2)
3 (N) (see fig. 2)
Permitted cable cross sections for connecting to the
connecting terminals of the floor heating actuator:
rigid cable [mm
0.5 – 1.50
60
Cable diameter
[mm]
> 5.2
> 8.2
> 3.2
2
]
maximum cable
diameter [mm]
5.8
11.0
5.0
Flexible cable without
ferrule [mm
0.5 – 1.50
2
]