Transport - MIRKA 1125 L PC Bedienungsanleitung

Connecting electrical machines (D)
Use the socket on the dust extractor for the purpose defined in the operating instructions only.
CAUTION! Follow the operating instructions and safety instructions for machines connected to the power tool socket.
Before plugging a machine into the dust extractor socket:
1. Switch off the dust extractor.
2. Switch off the machine to be connected.
Maintenance, cleaning and repair (E+F)
Only carry out maintenance work described in the operating instructions. Always disconnect the mains plug before
cleaning and maintenance of the dust extractor. Never spray water on to the upper section of the dust extractor. Danger
for persons, risk of short-circuiting.
The use of non-genuine spare parts and accessories can impair the safety of the dust extractor. Only use spare parts and
accessories supplied by Mirka Ltd.
During maintenance and cleaning, handle the dust extractor in such a manner that there is no danger for maintenance
staff or other persons.
In the maintenance area
Use filtered compulsory ventilation
Wear protective clothing
Clean the maintenance area so that no harmful substances get into the surroundings
During maintenance and repair work all contaminated parts that could not be cleaned satisfactorily must be:
packed in well sealed bags
disposed of in a manner that complies with valid regulations for such waste removal
A dust test must be performed at least once every year by Mirka service center or a trained person. This test includes, for
example, whether there is damage to the filter, the vacuum cleaner is sealed to the air and the control equipment works
properly.
Spare parts and accessories
Description
Filter element
Fleece filter bag (5 pcs)
The use of non-genuine spare parts and accessories can impair the safety and/or function of the appliance. Only use
original spare parts and accessories from Mirka. Spare parts that can affect the health and safety of the operator and/or
function of the appliance, are specified above.
Disposal of filter elements and filter bags
Discard filter elements and filter bags in accordance with the national regulations.

Transport

Before transporting the dirt tank, close all the locks. Do not tilt the dust extractor if there is liquid in the dirt tank. Do not
use a crane hook to lift the dust extractor.
Storage
The dust extractor must be stored in a dry place and protected from frost. Dry wet filter and interior parts of liquid container
before storage.
Bluetooth
This tool is equipped with Bluetooth®
Further service
Servicing must always be performed by trained personnel. To keep the tool warranty valid and ensure optimal tool safety
and function, servicing must be carried out by a Mirka authorized service centre. To locate your local Mirka authorized
service centre, contact Mirka Customer Service, your Mirka dealer or go to www.mirka.com
Mirka code
8999600411
8999000211
Mirka® Dust Extractor 1125 L PC
en (original)
13