Herunterladen Inhalt Inhalt Diese Seite drucken

Using The Appliance; Accessories Overview - MPM MOD-25 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für MOD-25:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
EN

USING THE APPLIANCE

1. Before turning on the vacuum cleaner, unwind the power cord ⑦ to a suitable length and plug it
into a mains outlet. The yellow mark on the power cord indicates the optimum length limit. Do not
pull out the power cord beyond the red mark! Do not press the vacuum cleaner handle ② when
unwinding the power cord. When folded down, the handle ② is the power cord winder button.
2. Press the power switch ③ to turn on the vacuum cleaner.
CAUTION! Set the suction power control ③ to MIN before turning on the vacuum cleaner!
3. Set the requires suction power with the suction power control ③. The rule of thumb is to use the
lowest power to clean gentle or fragile surfaces (set the suction power control toward MIN). Use
more suction power to clean heavy dust and dirt from floors and carpets (set the suction power
control toward MAX).
4. Monitor the dust canister level. Do not overfill the dust canister level above the MAX line. Other-
wise the suction power will be reduced and the filters will become dirty prematurely.
CAUTION! If you feel a rapid drop of the suction power, empty the dust canister and/or unclog
the suction hose.
5. The vacuum cleaner can be stowed in a space-saving manner with the level parking guide located
between the air discharge filter grill ⑧ tabs. Place the rail on the back of the floor and carpet
tool
in the level parking guide with the suction hose and the telescopic wand connected. There

is a second guide under the vacuum cleaner canister which facilitates storing the vacuum cleaner
upright.
6. To wind the power cord back into the vacuum cleaner canister, keep the handle ② folded down
and depressed. Control the winding speed by gently holding the power cord with the other hand
to avoid damage.

ACCESSORIES OVERVIEW

FLOOR-CARPET ATTACHMENT
Designed for cleaning large flat surfaces. It is equipped with castors that facilitate move-
ment in difficult to access places and a flexible joint, connecting it with the suction hose,
which allows directing at various angles. When you press the button on the upper at-
tachment housing (switch it to the brush mode), a row of rigid bristles will appear on the
bottom to facilitate cleaning hard floors.
SMALL MULTIFUNCTIONAL BRUSH WITH ADAPTER
Intended for cleaning flat surfaces, furniture, upholstery, and mattresses. The compact
sizes make it perfect for cleaning hard to reach places and whenever the floor and carpet
tool is too big. Install the brush on the adapter to easily clean blinds, furniture, soft sur-
faces (e.g. upholstered seats), upholstered chairs, creases and pleats on puffs, sofas, or
couches, and fragile objects, e.g. lampshades.
PARQUET BRUSH TOOL
Intended for cleaning all surfaces prone to scratching, e.g. wooden floors, varnished par-
quet floors, or flooring panels.
SMALL TURBO BRUSH
Designed for efficient cleaning of surfaces such as carpets, car pet flooring.
24

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis