Safety Precautions And Recommandations - Brandt BPI264HSB Bedienungshandbuch

USE USE
CLEAN LOCK function:
The Clean Lock function allows the table to be
temporarily locked during cleaning.
To activate the Clean Lock function, press the
button briefly, a beep will sound and the
symbol will flash. After about 1 minute,
the lock is automatically deactivated. A double
beep is heard and the
You can deactivate the Clean Lock function at
any time by pressing and holding the
ton.
SAFETY PRECAUTIONS AND RECOMMENDA-
TIONS
Residual heat:
After intensive use, the cooking zone that you
have just used can remain hot for several mi-
nutes.
The symbol H is displayed during this period .
Avoid touching the areas concerned during this
time.
Anti-overheat protection:
Each cooking zone has a safety sensor that
constantly monitors the temperature of the
bottom of the cookware. In the event that empty
cookware is left on a cooking zone that is swit-
ched on, the hob automatically lowers the power
output and thus limits any risk of damage.
Protection against overflows
A special display (symbol
followed with the hob switching off, may be
triggered in the following cases:
- Overflow that spills onto the buttons
- Damp towel placed over the buttons.
- Metallic object placed on the buttons
symbol disappears.
but-
), a sound signal,
Remove the object or clean and dry the touch
controls, then restart cooking.
Auto-Stop :
Your hob has an auto-stop device, which
automatically stops any cooking zone which
remains switched on for an excessive length of
time (between 1 and 10 hours depending on the
power used).
If this safety system is triggered, the cut-off to
the cooking zone is shown with the "A" display
on the control panel and a beep sounds for about
2 minutes. Simply press any of the buttons to
stop this.
Tips
Sounds which are similar to those of a clock
mechanism may be given off.
These noises occur when the hob is working. They
disappear or reduce depending on the heating
configuration. There may also be whistling
sounds depending on the model and quality of
your cookware. The noises described are normal.
They are related to induction technology and do
not indicate a problem.
Tips
We do not recommend a protective device.
EN
13