Cameo OPUS SP5 PLUS Bedienungsanleitung Seite 13

6 NET IN
RJ45 network connector for connecting to an Art-Net or sACN network. Use CAT 5e or better
cables to set up the network.
7 NET OUT
RJ45 network connector for connecting additional Art-Net or sACN-capable devices to the net-
work. Use CAT 5e or better cables to set up the network.
8 ANTENNA FOR W-DMX
The antenna for control via W-DMX
9
PRESSURE SENSITIVE LC DISPLAY WITH ILLUMINATION
Thanks to the pressure-sensitive LC display, the device can be operated directly from the display
(glove-compatible). The LCD display shows the currently activated mode (main display), the menu
items in the selection menu and the numerical value or operating status in certain menu items. If
there is no control signal to the device, the display starts flashing; the flashing stops as soon as a
control signal is present (DMX and slave operation, ArtNet and sACN).
10 TOUCH-SENSITIVE CONTROLS
MODE - Pressing MODE (repeatedly) takes you one level up in the menu structure, to the main
display.
UP  and DOWN  - Select the individual menu items in the main menu (DMX address, opera-
ting mode, etc.) and in the submenus.
ENTER – Starting from the main display, press ENTER to enter the main menu. In the main menu,
press ENTER to access the menu level in which values can be changed. Confirm value changes by
pressing ENTER.
LEFT  and RIGHT X - Use the control panels to change the value of a menu item, such as the
DMX address, as desired.
™
remains in the holder (= operating position) during operation.
™
11
9
10
13