BTS DC5D M K3 Serie Handbuch Seite 123

2
RS485 baud rate
3
CRC setting
b)
Working to plan
Not
Range (Default)
Parameter
has
Turn off
Working
Enable 1: Remote start Enable 2:
1
are planning
Network failure
and
Enable 3: 1 or 2 above Enable 4:
Run always
2
start time 00:00-23:59
3
00:00-23:59
End of time
4 give 1-31
c)
Setup data/time
Not
Parameter
has
1 Date
2
current time
d)
Define yourself is a curve
NO
Parameter
1
Determine yourself the oil pressure resistance curve
2
Determine yourself oil pressure Voltage curve
3
Determine the water temperature curve yourself
4
Determine your own fuel level curve
DC5xD MK3 GENSET CONTROLLER USER MANUAL
0-4800
1-9600
2-19200
3-38400
4-57600
5-115200
CRC: L_H
CRC: H_L
Range
default)
2016/01/01-
2099/12/31
00:00:00-23:59:59
RS485 communication baud rate.
RS485 communication High CRC correction in low bits
Notes
The work plan should be in automatic mode during the
operating time, the generator set should start if the conditions
are met and should STOP if the conditions are not met.
The generator set must not start when out of the
working time weather in reachable conditions no.
The start time is allowed.
The end time is allowed (the next day is valid).
multiple choice according to reality. The longest running time
is 24 hours.
(by
Notes
Permanent calendar inside, please correct time in a timely manner.
Permanent calendar inside, please correct time in a timely manner.
Notes
sensor
by the user for the panel buttons, resistance and, accordingly, the
MAX value of 15 groups, MIN of 2 groups should be entered.
Rule: resistance should be input from small to
large.
may be
curve Determined
39