Control And Operating Instructions - BTS DC5D M K3 Serie Handbuch

9.
CONTROL and operation instructions
-Instruction test mode: (onlyDC52D MK3 has this function)–
Click and make sure it is in the STANDING position before starting.
Press « » and the test file indicator lights up. At this time, it is detected whether there is a connection
of each sensor is normal. If the sensor is open, the sensor opens alarm. If this
normally, the process of starting the device is performed in the following sequence after pressing the
"automatic switch to the Generator to provide power when the unit is running normally. Press
" Kon
Appreciated
Long-
Without est
Pre-
pre-oil Start
heat
supply Crank
delay
delay delay
0 vol
5S 0S
Start mode instruction
press and make sure it is in the stop position before starting.
Press « » and the test file indicator lights up. At this time, it is detected whether there is a connection
of each sensor is normal. If the sensor is open, the sensor opens alarm. If this
normally, the process of starting the device is performed in the following sequence after pressing the
"automatic switch to the Generator to provide power when the unit is running normally. Press
"
" The controller performs the parking process at the following times:
Instr
Appreciated
Long-
Without est
Pre-
pre-oil Start
heat
supply Crank
delay
delay delay
0 vol
5S 0S
After a successful manual start
in an automatic file. The specific working hours are as follows:
DC5xD MK3 GENSET CONTROLLER USER MANUAL
Longest
speed
increasing
time
Start
Safe idle
Crank time time
test
time
8S 5S 120S
2S 8S
Longest
speed
increasing
time
Start
Safe idle
Crank
time time
test
time
8S 5S 120S
2S 8S
you can click "auto key".converted
Longest
Longest
voltage
temperature
built/
warming
increasing
increasing
up time
time
time
10S 120S 10S
Longest
Longest
voltage
temperature
runn-
built/
warming
increasing
increasing
up time
time
time
10S 120S 10S
rated
Cooling
runn-
running time
Eng
Stop
idle
time
ETS
solen-
oid
hold
30S 5S
10S
rated
Cooling
Eng running time
Stop
idle
time
ETS
solen-
oid
hold
30S 5S 10S
".
Wait
Stop
30S
".
Wait
Stop
30S
19