Adjusting The Upper Basket (Only On Some Models) - Haier XIB 6B2D3FB Bedienungsanleitung

ADJUSTING THE UPPER BASKET
If 29 cm to 32.5 cm plates are regularly used,
•
load them onto the lower basket after the
upper basket has been placed in its upper
position, as detailed below (according to the
model):
Type "A":
1. Turn front blocks "A" outwards;
2. Remove the basket and remount it in the
upper position;
3. Replace blocks "A" in the original position.
Dishes that are greater than 20 cm in diameter
can no longer be loaded onto the upper basket,
and the mobile supports cannot be used when
the basket is in the upper position.
Type "A"
(ONLY ON SOME MODELS)
Type "B": (only on some models)
1. Remove the upper basket;
2. Hold the basket on both sides and lift it
upwards (fig. 1).
Dishes that are greater than 20 cm* in diameter
can no longer be loaded onto the upper basket,
and the mobile supports cannot be used when
the basket is in the upper position.
* In models fitted with a third basket, dishes
measuring more than 14 cm in diameter can no
longer be loaded onto the upper basket.
ADJUSTING THE BASKET TO THE LOWER
POSITION:
1. Hold the basket on both sides and lift it
gently upwards (fig. 1);
2. Then slowly release into the correct position
(fig. 2).
N.B.: NEVER LIFT OR LOWER THE BASKET
FROM ONE SIDE ONLY (fig. 3).
WARNING
We recommend adjusting the basket before
loading the dishes.
Type "B"
EN 90