Haier XIB 6B2D3FB Bedienungsanleitung Seite 109

When no cycle is under way:
•
- The Wi-Fi indicator light will start to flash
slowly and the message "REMOTE
CONTROL OFF" will appear on the display.
When a cycle is under way:
•
- The Wi-Fi indicator light will start to flash
slowly and the message "REMOTE
CONTROL OFF" will appear on the display.
- The message "DOOR OPEN" will appear
on the display.
- The cycle will be completed without
control from the App.
Alternative way to exit remote control.
Press the "START/RESET" button for 3 secs.
•
If there is a cycle under way, it will be cancelled,
and the machine will exit REMOTE CONTROL
mode.
The "Wi-Fi" indicator light will flash slowly. It is
•
now possible to set a new wash cycle from the
control panel.
Press the "ON/OFF" button for 3 secs (or
•
power off)
If there is a cycle under way, it will be paused
and the machine will exit REMOTE CONTROL
mode.
On switching on again, the "Wi-Fi" indicator
light will flash slowly and any cycle under way
will continue from the point of interruption.
If the appliance is switched off and then on
again - either via the ON/OFF button or as a
result of a power failure - when REMOTE
CONTROL is enabled and a wash cycle is in
progress, the cycle will continue from the
point of interruption.
In this case, "REMOTE CONTROL" will be
disabled.
Opening the door, any REMOTE CONTROL
•
will be disabled. To resume control from the
App, close the door.
Wi-Fi CONNECTION INDICATOR LIGHT
This indicator light indicates the connection
status:
ON: remote control enabled.
•
FLASHING SLOWLY: remote control disabled.
•
FLASHING RAPIDLY FOR 3 SECONDS, THEN
•
OFF: the machine cannot connect to the
home Wi-Fi network or has not yet been
associated with the App.
3 SLOW FLASHES, THEN OFF FOR 2
•
SECONDS: reset of the Wi-Fi network (during
the association with the App).
ON FOR 1 SECOND, THEN OFF FOR 3
•
SECONDS: the door is open, remote control
cannot be enabled.
EN 109