Removing The Filter Panel; Replacing Carbon Filters - Pelgrim PSK1086RVS Anleitung

18
maintenance

Removing the filter panel

Switch off the electricity! Remove the plug from
the socket or switch the electricity off at the
mains. Pull the grille towards you and tilt it
downwards at the front.

Replacing carbon filters

The carbon filter must be used if the cooker hood is not connected to a duct
(see extraction systems on page 17).
Note:
The carbon filter must be replaced at least twice a year, depending on how
much the cooker hood is used.
Carbon filters cannot be cleaned to use again.
Saturated carbon is harmful to the environment, replace the filter regularly.
Fitting the carbon filter
Fix the carbon filter into the underneath of the
motor housing with the plastic clips (A). Replace
the filter grids in the extractor hood.
A