ETNA A4452LRVS/E02 Bedienungsanleitung Seite 52

INSTALLATION
Assembly
GB 12
Fitting the controls (D)
• Fasten the controls (D) using the 3 pre-mounted screws (G).
• Attach the flexible exhaust pipe H to the flange F.
Assembling the hood:
• Screw the inner frame (D) to the motor housing using the
4 screws (E).
• Remove the 2 screws (A) from the inner frame. The top part
of the inner frame (B) can now be moved in relation to the
bottom part of the inner frame (C).